Skip to main content

Sample application technique affecting whole blood creatinine point of care test stick results.

Thurlow V, Egwim I, Hobart C, Vincent R

Publication: Ann Clin Biochem (2019) • Page 4563219843569PMID: 31003580View on PubMed

Purpose

This paper investigated the effects of different methods of applying blood to test strips on the determination of creatinine levels in blood measured on a point-of-care device and compared the results with those obtained from serum using an autoanalyzer in the laboratory.

Conclusion

The closest agreement in creatinine values between blood using the point- of -care device and serum values using an autoanalyzer in the laboratory were observed when the test strip was dipped directly into the blood aliquot. Significantly higher creatinine levels were found using the meter when blood was applied to the test strips sideways through a capillary tube or by sampling from a drop of blood than when measured using the analyzer in the laboratory. However, the highest coefficient of variance (CV) for the meter was observed when the test strip was dipped directly into the blood.

Studies (1)

Purpose

This study investigated the effects of different methods of applying blood to test strips on the determination of creatinine levels in blood measured on a point-of-care device and compared the results with those obtained from serum using an autoanalyzer in the laboratory. Paired blood and serum were obtained from 15 patients (details not specified). Blood was applied to test strips by: (1) dipping the test strip directly into the blood aliquot, (2) sideways application to the test strip using a capillary tube, and (3) by sampling from a bead of blood on a glass slide. Test strips were then analyzed in duplicate using the StatSensor-iv point-of-care analyzer. Creatinine levels were measured in duplicate in serum in the laboratory using the kinetic Jaffe method on a Roche Cobas autoanalyzer.

 

Summary of Findings

The closest agreement in creatinine values between blood using the point-of-care device (130 µmol/L) and serum using the autoanalyzer in laboratory (140 µmol/L) were observed when the test strip was dipped directly into the blood aliquot. Significantly higher creatinine levels were found using the meter when blood was applied to the test strip sideways through a capillary tube or by sampling from a drop of blood than when measured using the analyzer in the laboratory (153 µmol/L and 158 µmol/L, respectively versus 140 µmol/L). However, the highest coefficient of variance (CV) for the meter was observed when the test strip was dipped directly into the blood (12.8%) rather than applied sideways to the test strip (10.1%) or by sampling from a blood drop (6.1%).

  • Biospecimens

    FluidBlood
    FluidSerum
  • Preservation Types

    None (Fresh)
  • Diagnoses

    Not specified
  • Platforms

    Small moleculeClinical chemistry/auto analyzer
  • Pre-analytical Factors

    ClassificationPre-Analytical FactorValue(s)
    Biospecimen Aliquots and ComponentsBlood and blood products
    Serum
    Whole blood
    Clinical chemistry/auto analyzer SpecificDetection method
    Blood applied to the test strip sideways using a capillary tube
    Test strip dipped directly into the blood aliquot
    Testing from bead of blood on a glass slide
    Clinical chemistry/auto analyzer SpecificTechnology platform
    Roche Cobas
    StatSensor-iv