Microparticle counts in platelet-rich and platelet-free plasma, effect of centrifugation and sample-processing protocols.
Chandler WL
Purpose
Conclusion
Studies (1)
Purpose
The purpose of this study was to determine the effects of centrifugation steps in the production of PFP and microparticle pellets and a single freeze-thaw cycle on microparticle counts. PRP was obtained from citrated blood by centrifugation at 100 g for 10 min. PPP was obtained from PRP by centrifugation at 1500 g for 20 min. PFP was obtained from PPP by centrifugation at 13,000 g for 2.3 min (PFP1) or 1500 g for 20 min (PFP2). Microparticles and microparticle poor plasma were obtained by centrifugation of PFP2 at 18000 g for 30 min. Microparticles were washed twice with HEPES buffer and centrifuged at 18,000 g for 30 min. An aliquot of PRP, PPP, PFP1, PFP2, microparticle poor plasma, and pre-wash and post-washing microparticles were assayed immediately and again after overnight storage at -80 degrees C.
Summary of Findings
The median microparticle count in PRP was 733,000/uL with microparticles ranging in size from 0.35 um to more than 1 um. The intensity of the annexin V and/or CD41 staining of microparticles in PRP increased with increasing size of the microparticles. Centrifugation of PRP to obtain PPP resulted in loss of 95% of the platelets, 79% of the annexin V and CD41 positive microparticles (Procoagulant microparticle, PrPMPs), 90% of the annexin V positive CD41 negative microparticles (annexin microparticles, AMPs) and 36% of the annexin V negative and CD41 positive microparticles (platelet microparticles, PMPs). Centrifugation at 13,000 g for 2.3 min to produce PFP1 or 1500 g for 20 min to produce PFP2 led to the loss of 99% of the platelets, 84% of the PrPMPs, 93% of the AMPs, and 58% of the PMPs compared to PRP, with only slightly larger losses observed in PFP1 than PFP2. Further, centrifugation steps to produce microparticles or wash microparticles led to non-significant loss of PrPMPs, AMPs, and PMPs. Subjecting PRP to a single freeze-thaw cycle led to 20-, 9- and 4-fold higher PrPMP, AMP and PMP counts, respectively, and a single centrifugation step was not sufficient to overcome the freeze-thaw effect. The effects of a single freeze-thaw cycle on PRP were smaller with only a 2-fold increase in PrPMP, a 60% increase in AMP, and no change in PMP. Freeze-thawing of PFP1 or PFP2 only led to a 20% increase in AMP counts, and freeze-thawing of microparticles increased PrPMP and AMP counts by 30-50%.
Biospecimens
FluidPlasmaPreservation Types
None (Fresh)FrozenDiagnoses
NormalPlatforms
Cell count/volumeFlow cytometryPre-analytical Factors
Classification Pre-Analytical Factor Value(s) Biospecimen Aliquots and Components Blood and blood products Microparticle free plasmaMicroparticlesPlatelet free plasmaPlatelet-poor plasmaPlatelet-rich plasmaBiospecimen Aliquots and Components Centrifugation Multiple durations comparedMultiple speeds comparedBiospecimen Preservation Type of fixation/preservation FrozenNone (fresh)Storage Freeze/thaw cycling 0 cycles1 cycle