Blood gas analysis: POCT versus central laboratory on samples sent by a pneumatic tube system.
Zaman Z, Demedts M
Purpose
The purpose of this paper was to determine the effects of pneumatic tube system (PTS) transport and blood gas analyzer type on the measurement of blood gas in specimens from patients with lung diseases.
Conclusion
After PTS transport, there were small changes in pH and partial pressure carbon-dioxide (pCO2)compared to specimens that were not transported, and there was a large bias in partial pressure oxygen (pO2) when specimens containing air bubbles were transported by PTS compared to those analyzed without being transported.
Studies (1)
Purpose
The purpose of this study was to determine the effects of PTS transport and blood gas analyzer type on the measurement of blood gas in specimens from patients with lung diseases. Specimens were analyzed at bedside using the IL blood gas analyzer and then sent at room temperature through a PTS and reanalyzed on the Corning 288 blood gas analyzer. This second analysis occurred an average of 13.3 min later (<10 min transport) in specimens from the lung function laboratory (LFL) and 20.2 min (<4 min transport) later in specimens from the pneumology ward.
Summary of Findings
After PTS transport, specimens from the LFL had a 0.0012 increase in pH and a 0.29 mm mercury (Hg) increase in pCO2 compared to specimens analyzed at the patient bedside. The average pO2 in specimens from patients in the LFL undergoing a 100% oxygen (O2) test was 446 mm Hg when analyzed in the LFL and 346 mm Hg after PTS transport to the central laboratory. Prior to the 100% O2 test, LFL patient specimens contained no air bubbles, had a bedside PO2 of 41-107 mm Hg, and showed an average decrease in PO2 of 2.4 mm Hg after PTS transport to the central laboratory. Specimens from the pneumology ward frequently had air bubbles (68%), and after PTS transport, had average increases in pH of 0.012, decreases in pCO2 of 1.64 mm Hg, and increases in PO2 of 12.93 mm Hg (initially 37-183 mm Hg) compared to specimens that were analyzed immediately. Importantly, the effects attributed to PTS transport cannot be distinguished from those due to use of different analyzers or delayed analysis.
Biospecimens
FluidBloodPreservation Types
None (Fresh)Diagnoses
Other diagnosesPlatforms
GasClinical chemistry/auto analyzerSmall moleculepHPre-analytical Factors
Classification Pre-Analytical Factor Value(s) Preaquisition Diagnosis/ patient condition Lung diseaseStorage Specimen transport duration/condition 0 min<10 min<4 minAir bubblesNo air bubblesStorage Within hospital transportation method Not transportedPneumatic tube systemClinical chemistry/auto analyzer Specific Technology platform Corning 288 blood gas analyzerIL blood gas analyzer