Skip to main content

Stability of heparin blood samples during transport based on defined pre-analytical quality goals.

Jensen EA, Stahl M, Brandslund I, Grinsted P

Publication: Clin Chem Lab Med (2008) • Vol 46 • Page 225-34PMID: 18324907View on PubMed

Purpose

The purpose of this paper was to determine the allowable temperature and time for transport of blood specimens.

Conclusion

Optimal transport conditions were centrifugation within 3/4 of an hour and storage and transport at 21 degrees C. Other conditions such as delayed centrifugation or mail transport at ambient temperatures led to a large percentage of specimens in which the levels of phosphate, potassium, ALT, GGT, and LD were outside the acceptable range.

Studies (1)

Purpose

The purpose of this study was to determine the effects of storage and transport temperatures (-4.3 degrees C to over 30 degrees C) and storage prior to and after centrifugation on common blood analytes. Specimens collected during summer and winter were exposed to ambient and room temperatures for different amounts of time during storage and transport by mail, courier or publicbus both prior to and after centrifugation. Analytes investigated include alanine aminotransferase (ALT), albumin, alkaline phosphatase, bilirubin, calcium, total cholesterol, cabalamin (B12), c-reactive protein, creatinine, creatine kinase, free thyroxine, gamma-glutamyltransferase (GGT) lactate dehydrogenase (LD), HDL-cholesterol, LDL-cholesterol, phosphate, potassium, sodium, triglycerides, thyreotropin, and urate.

Summary of Findings

Phosphate, potassium, ALT, GGT, and LD were most notably adversely impacted by storage time and temperature. Optimal transport conditions, which included centrifugation within 3/4 of an hour and storage and transport at 21 degrees C, resulted in more than 96% of specimens being within the acceptable range for each analyte during the summer and 98% in the winter.

  • Biospecimens

    FluidBlood
    FluidPlasma
  • Preservation Types

    None (Fresh)
  • Diagnoses

    Not specified
  • Platforms

    Electrolyte/MetalClinical chemistry/auto analyzer
    GlycoproteinClinical chemistry/auto analyzer
    LipidClinical chemistry/auto analyzer
    ProteinClinical chemistry/auto analyzer
    PeptideClinical chemistry/auto analyzer
    Small moleculeClinical chemistry/auto analyzer
    SteroidClinical chemistry/auto analyzer
  • Pre-analytical Factors

    ClassificationPre-Analytical FactorValue(s)
    Biospecimen Aliquots and ComponentsCentrifugation
    Centrifugation delays investigated
    StorageBetween site transportation method
    Courier
    Mailed
    Public transportation
    StorageSpecimen transport duration/condition
    Exposure to outdoor temperatures for 30 min prior to transport
    Mailed on gel
    Outside with an average low of -4.3 degrees C and high of 1.5 degrees C
    Outside with an average temperature over 30 degrees C
    Transport after centrifugation
    Transport prior to centrifugation
    Transported upright with no exposure to outside temperature
    StorageStorage duration
    0 h
    10 h
    30 h
    6 h
    8 h
    StorageStorage temperature
    21 degrees C
    Outside with an average low of -4.3 degrees C and high of 1.5 degrees C
    Outside with an average temperature over 30 degrees C
    Room temperature