Skip to main content

The effects of 0.1 and 1.0 per cent erythrocytes and hemolysis on serum chemistry values.

Laessig RH, Hassemer DJ, Paskey TA, Schwartz TH

Publication: Am J Clin Pathol (1976) • Vol 66 • Page 639-44PMID: 970364View on PubMed

Purpose

The purpose of this paper was to determine the effects of contamination of serum with intact or hemolyzed red blood cells on serum chemistry values.

Conclusion

Contamination of serum with 0.1% or 1% non-hemolyzed erythrocytes had no effect on any of the 40 tests performed in this study. Contamination of serum with 1% hemolyzed erythrocytes turned the serum a cherry red color which would most likely lead to rejection of the specimen for analysis. Indeed this level of contamination led to gross changes in clinical chemistry values. Importantly, contamination of serum with 0.1% hemolyzed erythrocytes caused significant increases in lactate dehydrogenase, aspartate aminotransferase, creatine phosphokinase, alanine aminotransferase, iron, and iron-binding capacity, and potassium. Contamination at this level was not visually apparent and these specimens would most likely not be rejected for analysis in a clinical setting on the basis of hemolysis.

Studies (1)

Purpose

The purpose of this study was to determine the effects of contamination of serum with intact or hemolyzed red blood cells on serum chemistry values. Whole blood, with or without sodium saponin-induced hemolysis, was added to serum from healthy individuals and 40 clinical chemistry tests were performed.

Summary of Findings

Contamination of serum with 0.1% or 1% non-hemolyzed erythrocytes had no effect on any of the 40 tests performed in this study. Contamination of serum with 1% hemolyzed erythrocytes turned the serum a cherry red color which would most likely lead to rejection of the specimen for analysis. Indeed this level of contamination led to gross changes in clinical chemistry values including increased calcium, phosphorus, total protein, magnesium, albumin, and direct cholesterol levels in addition to increases seen with 0.1% hemolyzed erythrocytes. Importantly, contamination of serum with 0.1% hemolyzed erythrocytes caused significant increases in lactate dehydrogenase, aspartate aminotransferase, creatine phosphokinase, alanine aminotransferase, iron, and iron-binding capacity, and potassium. Contamination at this level was not visually apparent and these specimens would most likely not be rejected for analysis in a clinical setting on the basis of hemolysis.

  • Biospecimens

    FluidSerum
  • Preservation Types

    None (Fresh)
  • Diagnoses

    Normal
  • Platforms

    Electrolyte/MetalClinical chemistry/auto analyzer
    Electrolyte/MetalFlame emission photometry
    CarbohydrateClinical chemistry/auto analyzer
    SteroidClinical chemistry/auto analyzer
    LipidClinical chemistry/auto analyzer
    ProteinClinical chemistry/auto analyzer
    ProteinSpectrophotometry
    PeptideClinical chemistry/auto analyzer
    Small moleculeClinical chemistry/auto analyzer
  • Pre-analytical Factors

    ClassificationPre-Analytical FactorValue(s)
    Biospecimen Aliquots and ComponentsBiospecimen components
    0.1% erythrocytes in serum
    0.1% hemolyzed erythrocytes in serum
    1% erythrocytes in serum
    1% hemolyzed erythrocytes in serum
    Serum
    Serum with sodium saponin
    Biospecimen Aliquots and ComponentsHemolysis
    Chemically-induced
    Hemolysate added
    No hemolysate added